An Expert Guide to Assessment Validation: Validating Assessments
An Expert Guide to Assessment Validation: Validating Assessments
Blog Article
With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Despite our extensive coverage on validation, let's re-examine the term. ASQA states that validation is a quality check of the assessment process.
Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.
Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.
As per the standards, two kinds of validation are required.
The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.
The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.
This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.
A Look at the Two Types of Assessment Validation
A Deep Dive into Assessment Validation
As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.
Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
Steps for Conducting Assessment Tool Validation
Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.
When Assessment Tool Validation Should Be Done
The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.
You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.
However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:
- your resources get updated
- your new training products get added on scope
- your course includes training product updates
- learning resources get identified as a risk during your risk assessment
ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.
Which Training Products Should You Validate?
Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.
Key Resources for Assessment Tool Validation
Academic Resources
To validate assessment tools, you need the complete suite of your learning resources:
Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.
Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.
Assessment Validation Team
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
Your validation panel, as a group, must possess:
Up-to-date vocational competencies and industry skills pertinent to the unit being validated
Up-to-date knowledge and skills related to vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or an updated successor
Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Principles of Assessment Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Does the assessment provide equal opportunity and access to all participants?
Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?
Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Evidence Core Rules
Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required read more skills and knowledge?
Authenticity – Is the assessment tool verifying that the work belongs to the candidate?
Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?
Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:
Practice What You Preach
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
nappy change
bottle preparation, bottle-feeding infants, and cleaning equipment
prepare solid food and feed babies
appropriately respond to infant signs and cues
prepare infants for sleep and settle them
monitor and encourage suitable physical exploration and gross motor skills for the age
Getting students to describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Complete or Not Competent
Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?
The answer can include:
Required resources
Applicable expenses
Time assigned for activities
Allocated roles and responsibilities
If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.
The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:
Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.
Answers can include, but are not limited to:
Weather conditions – work area isolation, engineering controls, personal protective equipment
Work area and ground conditions – elimination, isolating, engineering controls
People – isolating, use of engineering controls, administration
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, engineering controls, administrative controls
Equipment or machinery – isolation, engineering, administration
Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.
Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.